Skip to content

Order by 2pm for same-day dispatchMade to BS AU 145e3-year warranty

SMARTMOTORBIKE PLATES

Motorbike Plate Sizes

Motorbike plates come in three sizes here: 9×7, 8×6 and 7×5 inch. Only 9×7 keeps the letters at the full 64 mm × 44 mm road size; the two smaller sizes are show style.

Design a 9×7 plateRear plate from £14.99

Which motorbike plate size do you need?

Choose 9×7 inch if the plate has to meet road spec. Choose 8×6 or 7×5 inch if your bike has a small mount and you accept a show-style plate.

The size you want depends on where the plate sits. A standard rear mudguard has room for 9×7. A tail tidy or a plate hanger often leaves less.

What are the three sizes?

Size Letters Builder label Best for
9×7 inch 64 mm × 44 mm, two lines Meets road spec Standard rear mounts, replacing a worn plate
8×6 inch Smaller than road size Show style Tidier rear ends, display bikes
7×5 inch Smaller still Show style Tail tidies, small hangers, show bikes

Every plate is a single rear plate at £14.99 before extras. Pick your size in the plate builder and the price updates as you add options.

Why are 8×6 and 7×5 show style?

The letters on 8×6 and 7×5 shrink below the 64 mm × 44 mm that UK display rules set for bike characters. A smaller plate cannot hold full-size letters, so the builder tells you it is show style and says why.

Show plates are for display and off-road use. Driving with a plate that does not meet UK rules can mean a fine of up to £1,000 and an MOT fail.

How do you pick the right size for a tail tidy?

Measure the space on your mount or hanger first, then compare it with the table above. If the mount takes 9×7, order 9×7. If it only takes a smaller plate, 8×6 or 7×5 will fit and the label will read Show style.

Looking for the plate style as well? The 4D motorbike plates page covers raised letters, and a fixing kit is £3.99 in the builder.

Why is there no front plate size?

Bikes registered from 1 September 2001 display a rear plate only. That is why you only choose one size here, not a pair. Older bikes may differ, so check your registration date before you order.

Jump straight to a size

Not sure about ordering steps? How ordering works walks through size, style and border.

Questions about motorbike plate sizes

What size is a standard motorbike number plate?

The standard motorbike plate is 9×7 inch, with letters 64 mm high and 44 mm wide set on two lines. It is the size our builder labels Meets road spec.

Can I fit an 8×6 or 7×5 plate on my bike?

You can order both, and they suit a tail tidy or a small hanger. The letters shrink below the road size, so the builder labels them Show style.

Do motorbikes need a front plate?

No. A bike registered from 1 September 2001 shows a rear plate only, so every plate on this site is a single rear plate.

Does the plate size change the price?

A standard rear plate is £14.99. Extras such as 3D gel, 4D or a border are added on top, and the builder shows each +£ before you pay.